Page 1 of 1

Parcelair parking stands

PostPosted: Wed Jan 04, 2023 7:08 am
by tanken2
Hi
Can anyone tell me which stand at Palmerston North is used for loading / unloading the parcel air 737's .
thank you.

Re: Parcelair

PostPosted: Wed Jan 04, 2023 10:34 am
by SA227
The ground chart doesn't show it very well but it's gate 7.

It's a straight line in from taxiway Charlie and stop short of the corner of the Fieldair hangar, then a left turn out to depart.

Re: Parcelair

PostPosted: Wed Jan 04, 2023 12:50 pm
by deeknow
Been wondering that meself, is this the spot SA? Defo a left turn and apron looks to match the chart for parking-7 so picking so...
Watch on youtube.com

Re: Parcelair

PostPosted: Wed Jan 04, 2023 1:35 pm
by tanken2
thanks , now I can set my start point correctly. :D

Re: Parcelair

PostPosted: Wed Jan 04, 2023 1:45 pm
by tanken2
[img][img]https://i.postimg.cc/mgmm0ZvP/palmerston-north-2020.png[/img][/img]
Image
this is Dec 2020 aerial photo , looks like it is juast past 7 but no stand number

Re: Parcelair

PostPosted: Wed Jan 04, 2023 1:58 pm
by SA227
Yep, that's it.

Google earth has the current lines and you can see the very limited part of the tarmac that has been strengthen for the 737

Re: Parcelair

PostPosted: Thu Jan 05, 2023 6:54 am
by tanken2
I'm re modeling nzpm now in XP12 with the stands 1B-7 and stand marked B737-400 as per aerial photos.

Parcelair

PostPosted: Sun Jan 22, 2023 9:48 am
by tanken2
In have sorted NZCH and NZPM stands and believe that NZAA stands used by Parcelair are 70-73 next to Jetstar gates. Is this correct? thanks

Re: Parcelair

PostPosted: Mon Jan 23, 2023 4:29 pm
by SA227
Negative. At the end of taxiway C5. Sort of on gate 50C but with the tail towards the carpark

Re: Parcelair

PostPosted: Mon Jan 23, 2023 5:07 pm
by deeknow
think mark shared a shot of the exact spot here right SA? 5th photo down at this link...
viewtopic.php?p=8414998#p8414998

PS hope you dont mind Tanken but I merged your two topics together

Re: Parcelair parking stands

PostPosted: Thu Jan 26, 2023 6:42 pm
by SA227
yep that's it