PilotPom wrote:Well, thanks for the input guys, will definately take that on board (motherboard that is!). I do already have a spare 500Gb HD in my tower, but it gave me a few probs so I unplugged it and brought another, but I'll try it again, reformatting it and see how I go. Wife won't let me spend too much!
I have my eye on two graphics cards... Gigabyte Geforce 220 1GB GDDR3 PCIE, or SAPPHIRE HD 5670 512MB GDDR5 PCIE. More memory or faster speed? If you think either of these are good then I'll part with some cash!
I'm thinking about sticking another 2Gb of RAM in too, couldn't hurt. It's cheap enough and 4Gb is the max my board can take anyway so why not! I'll pop in another PSU while I'm at it!
Thanks again,
Pom.
Either of those 2 graphic cards will suit FS9 well enough. Since FS9 is quite old now, putting a very powerful graphic card in is a waste of dosh, as there is only so much complexity of video that FS9 can produce. But, as I say, both those cards you mention will do the trick. The only thought there is that if you plan (or are allowed...

) to go to FSX or whatever the next sim coming is called in the next 12-18 months, those 2 cards you mention will be "dead money" as they are too weak for FSX (and probably the next sim as well).
As for the RAM, if you're running a 32-bit OS (which presumably you are), you'll only get use 3.5GB out of the 4GB. Not sure if FS9 will actually make use of the extra RAM - I don't use it anymore, and the last time I did it was on a 2GB system. Hopefully someone else here still using FS9 can comment on that for you. If you do go more RAM, just make sure you have same brand / same manufacturing run / same size DIMMs - in other words, dual-channel. One doesn't have to buy the special kits to do this: so long as you get, say, 2 x 2GB DDR2 DIMMs from the same store from the same batch, the computer will be happy to accept them comfortably as dual-channel. Even if XP ignores the last half GB of the 4GB, it's better to have the hardware running in the dual-channel configuration for optimal through-put.
With the PSU, don't get a cheap brand. Also, make sure it has at least 2 x 12v rails and Active PFC. I like the following brands (in no particular order): ThermalTake, SilverStone & AcBel. They are all made from good quality components, have lifetime (which means either 5 or 10 years - not YOUR lifetime!

) warranties, and most of their models have dual 12v rails (the more expensive ones have 3 or 4 rails) and Active PFC. If you can get a Silver 80 Plus rating unit, that's even better. It's VERY important to have smooth, clean power for your components. I also strongly recommend a line-interactive UPS, as there are 9 different types of "power events" that get fed into our PCs from the power companies on a regular basis. A line-interactive UPS smooths all the cr@p out and also gives you 5-10 mins of full battery backup. Be aware that all warranties on computer hardware are void if failure is found to be due to a "power event". Most people are unaware of the fact that "power events" are not just excess supply of power, but also lacks. And computer hardware does not take kindly to either. As time goes along and our poor PCs are forced to endure many micro power events (you know the type: it flicks the TV screen or lights but not enough to switch them off), the damage to the internal components - especially on the motherboard - is cumulative. Then one day, you power up, there is a "BANG" and that horrible burnt "brown" smell, and... well, you can guess the rest. UPSes are not cheap - a good one will set you back $200-$220, but they last 3-5 years, and the good ones come with excellent guarantees (including connected-devices payouts up to $50k in some cases). I recommend, sell and use the Eaton PowerWare series. You'd need at least a 700VA model.
Anyway, hope it all goes well for you!
