NZFF

My prblm,I have no nav lights,everything is in the aircraft CFG,but when I swits this on nothing happens.

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -3.47, -13.80, 0.32, fx_SF260_navred
light.1=3, -3.47, 13.80, 0.32, fx_SF260_navgre
light.2=3, -17.84, 0.00, 0.62, fx_SF260_navwhi
light.3=2, -3.50, -13.80, 0.20, fx_SF260_strobe
light.4=2, -3.50, 13.85, 0.20, fx_SF260_strobe
light.5=1, -9.80, 0.00, -0.98, fx_SF260_beacon
light.6=4, -3.00, 0.20, 1.00, fx_SF260_vclight
light.7=3, -3.30, -13.82, -0.05, fx_SF260_VCnavred
light.8=3, -3.47, 13.85, -0.06, fx_SF260_VCnavgre
light.9=2, -3.28, -13.75, -0.12, fx_SF260_VCLstrobe
light.10=2, -3.50, 13.75, -0.12, fx_SF260_VCRstrobe
light.11=4, -2.40, -10.75, 1.80, fx_SF260_winglight
light.12=4, -2.40, 10.75, 1.80, fx_SF260_winglight
light.13=4, -17.4, 0.00, 2.40, fx_SF260_winglight

Can anybody help me.Thx

You may be using a non-original copy.
Best to re-install from the original purchase installer.

Charl wrote:

QUOTE (Charl @ Dec 3 2010, 09:59 AM) <{POST_SNAPBACK}>

You may be using a non-original copy.
Best to re-install from the original purchase installer.

Yup that would be a good idea. If you don't want to reinstall though, have a look in your 'EFFECTS' folder and see if you have the fx_SF260_* lighting effects in there. If not, you can always just rename them to one of the default lighting effects.....