Page 1 of 1

PostPosted: Tue Mar 13, 2007 8:27 am
by dnkiwi
hi guys i have recently purchased a nVidia 6600 gigabyte card and am wondering if the new card will make a bigger diference when running fsx as opposed to my current card that is a ATI RADEON X300se so any help or advice would be welcomed











---------------------
jason >nzflag< :plane: :thumbup:

PostPosted: Tue Mar 13, 2007 11:55 am
by HardCorePawn
Depends on which version of the 6600 you have... and what sort of CPU you have... how much RAM etc.

FSX is a complex beast, and there is no simple 'change one component' solution to getting it running like FS9 does now ;)

PostPosted: Tue Mar 13, 2007 1:02 pm
by Zöltuger
whilst a 6600 will be an improvement over x300, i doubt whether it'll be significant enough.
I assume you've got a PCIe slot, and not an AGP slot

PostPosted: Tue Mar 13, 2007 2:37 pm
by dnkiwi
yes i have pcie slots and dual channel ram p4 cpu 3 ghz ,3.0 ghz 2 gig ram with hyper threading 7.1 channel sound card usb 2 x 6 and is the 6600 le model

PostPosted: Tue Mar 13, 2007 4:05 pm
by brownbox
kinda pointless, but word has it you can turn a 6200 into a 6600? :o

PostPosted: Tue Mar 13, 2007 5:03 pm
by dnkiwi
is that possible

PostPosted: Thu Mar 15, 2007 6:13 am
by brownbox
ah yes it can, but sorry, only the AGP version :(

PostPosted: Thu Mar 15, 2007 12:00 pm
by dnkiwi
that sounds interesting i have spent the last few days susing out how my old card comes out as the set up is far different to most pc s so with a bit of luck i should get it sorted

PostPosted: Thu Mar 15, 2007 12:17 pm
by Zöltuger
a 6600LE is a budget model. go for a 7600GS, it'll give quite a bit more speed.

PostPosted: Thu Mar 15, 2007 1:04 pm
by dnkiwi
ok thanks i might look at upgarging later on as i got the 6600 for $93 so i will have make do until i get some more funds to upgrade again but thanks for the advice

PostPosted: Thu Mar 15, 2007 2:34 pm
by Zöltuger
ok then, hope you get a performance boost

PostPosted: Thu Mar 15, 2007 3:00 pm
by dnkiwi
thanks i will keep u guys posted with any updates