NZFF

Posted: **Sat Aug 02, 2014 9:57 am**

Just Flights DC-3 Special almost like they know there is a mulitplay on today

http://www.justflight.com/product/dc-3-leg...flight-download

Posted: **Sat Aug 02, 2014 11:06 am**

Ian Warren wrote:
QUOTE (Ian Warren @ Aug 2 2014,9:57 AM) <{POST_SNAPBACK}>
Just Flights DC-3 Special almost like they know there is a mulitplay on today
http://www.justflight.com/product/dc-3-leg...flight-download

Nice, I'm gonna dl it and test it out

what time is multiplayer

Posted: **Sat Aug 02, 2014 12:01 pm**

Kamoflarj wrote:
QUOTE (Kamoflarj @ Aug 1 2014,7:06 PM) <{POST_SNAPBACK}>
Nice, I'm gonna dl it and test it out what time is multiplayer

2130 US Eastern / 1330 NZ Time

Posted: **Sat Aug 02, 2014 12:03 pm**

Good on getting the JF Dak, MP at 1.30 , I am on TS currently but away till 12.45 so if you need a little help and request IP address to get in be the way to go

Thought I'd get the MP running 30 minutes earlier just so you can and peoples can get a feel for what its like. SEE YA THERE !

Posted: **Sun Aug 03, 2014 1:37 pm**

Any civil NZ repaints for this model (otherwise will just stay with the Bitzer/Beaumont tweaked Awesome4some and/or MAAM dak)?

TIA.

Posted: **Sun Aug 03, 2014 2:41 pm**

ZK-LGD wrote:
QUOTE (ZK-LGD @ Aug 3 2014,2:37 PM) <{POST_SNAPBACK}>
Any civil NZ repaints for this model (otherwise will just stay with the Bitzer/Beaumont tweaked Awesome4some and/or MAAM dak)?

Send Greg .. aka Scaber a note , He did one off the "Southern Air DC-3" now hangered in Ashburton... sure he'd be happy to see it flying around after the effort .

Posted: **Sun Aug 03, 2014 3:01 pm**

Thanks Ian.

Posted: **Sun Aug 03, 2014 4:20 pm**

Anyone tried this in P3Dv2?
I'm downloading the trial right now but I'm always reluctant to try non-P3d in P3D, if you see what I mean.
You are never quite sure what will get over-written or modified in key files/folders.
Sure did miss being a part of the MP yesterday ... great shots in the other thread ... just a little envious...
Cheers

Posted: **Sun Aug 03, 2014 4:35 pm**

jpreou wrote:
QUOTE (jpreou @ Aug 3 2014,4:20 PM) <{POST_SNAPBACK}>
Anyone tried this in P3Dv2?
I'm downloading the trial right now but I'm always reluctant to try non-P3d in P3D, if you see what I mean.
You are never quite sure what will get over-written or modified in key files/folders.
Sure did miss being a part of the MP yesterday ... great shots in the other thread ... just a little envious...
Cheers

man, did I have adrenalin doing that taupo landing.. never done anything quite like it on fsx

Posted: **Sun Aug 03, 2014 4:38 pm**

The answer to the JF DC3 in P3Dv2, at least on my system, is sadly no.
After I pointed the installation at my P3D folder (it couldn't find FSX, unsurprisingly) then at first it seemed promising.
But just 20s after take-off I got a huge brown textured square in my forward VC view and in the external views nothing but main wheels and the tail light.
Not sure why it started ok then went like that, but there you go.
No DC3 for me.

Posted: **Sun Aug 03, 2014 5:59 pm**

jpreou wrote:
QUOTE (jpreou @ Aug 3 2014,5:38 PM) <{POST_SNAPBACK}>
No DC3 for me.

And the MJ model ? .. success or or same issue .. dose the P3D come with the DC-3 ?

Posted: **Sun Aug 03, 2014 6:32 pm**

No DC3 in P3D.
Where would one fine this "MJ" model?

Posted: **Sun Aug 03, 2014 6:41 pm**

jpreou wrote:
QUOTE (jpreou @ Aug 3 2014,7:32 PM) <{POST_SNAPBACK}>
No DC3 in P3D.
Where would one fine this "MJ" model?

Jimmy Jillickers Jeff .. now that's a JJJ .. we will hook you into it here http://www.flightsim.com/vbfs/fslib.php?searchid=27094010 - advanced original photo real cockpit incoming based on the Wigram Museum DC-3 hanger queen incoming shortly

Posted: **Mon Aug 04, 2014 6:44 pm**

Link broken, but I think I found it after a search.

Posted: **Mon Aug 04, 2014 10:14 pm**

jpreou wrote:
QUOTE (jpreou @ Aug 4 2014,7:44 PM) <{POST_SNAPBACK}>
Link broken, but I think I found it after a search.

Sweet .. NZ paint Greg aka 'Scaber' did a Southern Air DC3 http://www.southerndc3.com/index.html . for the JF model .

Posted: **Mon Aug 04, 2014 10:24 pm**

Ian Warren wrote:
QUOTE (Ian Warren @ Aug 4 2014,11:14 PM) <{POST_SNAPBACK}>
Sweet .. NZ paint Greg aka 'Scaber' did a Southern Air DC3 http://www.southerndc3.com/index.html . for the JF model .

As far as the real site is concerned .. It has been closed down BUGGER! .. least Greg still has his real paint for it !

Posted: **Tue Aug 05, 2014 8:09 am**

It worked, though an NZ paint I found didn't (I don't think it was the one you mentioned). Had no sound though, which was annoying. Removed it from my system. Maybe I'll try again, maybe not. I don't like to fiddle ... I work with computers all day and simply don't want to waste time at home trying to get things working ... they work or they don't, and if they don't, then I don't have time for them. Harsh maybe, but that's the way it is at the moment; I have limited time and want to maximise it actually flying and not tinkering.
Cheers

Posted: **Tue Aug 05, 2014 9:09 am**

jpreou wrote:
QUOTE (jpreou @ Aug 5 2014,9:09 AM) <{POST_SNAPBACK}>
It worked, though an NZ paint I found didn't (I don't think it was the one you mentioned). Had no sound though, which was annoying.

You will get use to that regard to any Flight Sim program ... should say least Microsoft .. least they give you the idea/chance to play around building and adding .

Posted: **Wed Aug 06, 2014 8:08 am**

I used to love tinkering, even a little programming at one stage in life, but these days with the short time I get from looking after the family (2 older kids, 2 very young ones) I value that time. I did download and 'install' Dino Cattaneos T45 and F14 last night though, which was fun until the T45 decided to enter a 'spin' but not lose any altitude and from which I was unable to recover!

Posted: **Wed Aug 06, 2014 11:09 am**

jpreou wrote:
QUOTE (jpreou @ Aug 3 2014,4:20 PM) <{POST_SNAPBACK}>
Anyone tried this in P3Dv2?
I'm downloading the trial right now but I'm always reluctant to try non-P3d in P3D, if you see what I mean.
You are never quite sure what will get over-written or modified in key files/folders.
Sure did miss being a part of the MP yesterday ... great shots in the other thread ... just a little envious...
Cheers

Did you use the very latest Estonia migration tool program to install it?

NZFF

Just Flight DC-3