Page 1 of 1

Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Thu Mar 11, 2021 7:20 pm
by Splitpin
I've downloaded the Beta Hong Kong scenery ...but I'm confused ...still :rolleyes:
Prior to this, it was all automatic(ORBX etc), but this is different.... guidance please when you have time.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Thu Mar 11, 2021 8:22 pm
by emfrat
Splitpin wrote:I've downloaded the Beta Hong Kong scenery ...but I'm confused ...still :rolleyes:
Prior to this, it was all automatic(ORBX etc), but this is different.... guidance please when you have time.


Marty, I haven't d/l it meself yet BUT:
1) it is a .rar file so you might need 7Zip (a freebie) to unpack it. Unzip it to any temporary folder (I use the one 7zip creates in my Downloads folder) and then...
2) It is a third party add-on, so it goes into C:/ Users/Documents/AFS2/Addons/Scenery

Do not put third-party stuff into the C:/Program Fies/AFS2 area. Non-IPACS stuff in there will be wiped if there is an AFS2 update.

That should get you set, but I will install it ASAP and let you know all the gory details. Bris-bunn tomorrow morn for a haircut, but it won't be long after that :lol:

ATB, Mike

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Fri Mar 12, 2021 7:10 am
by emfrat
Good Morning Marty - I have it working, without any dramas. Just simple Extract, Cut/Paste, or Move if you prefer. I did rename the rar to KaiTak_beta_AFS2.rar, because Colin used the name of the main program for the name of his file. Full details later, don't work too hard. I should be home sometime after 1300, which is 1600 your time.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Fri Mar 12, 2021 7:21 am
by Charl
Marty... you should edit that title.
There is only one AFS2 guru around here, and I sit at his knee :o
Mike is the AFS2 flight model/avionics suite up to this?
I have only ever flown VFR in it.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Fri Mar 12, 2021 8:43 am
by emfrat
Charl wrote:There is only one AFS2 guru around here, and I sit at his knee :o


Who would that be, Charl? Doesn't sound like me :o My flightsim experience is so vast that I can create the kind of stuff-up newbies only dream about, so I can usually find my way out of the problems I create, but that's all. :rolleyes:
I was weaned on proper control columns, and big rumbly engines each with three levers to control them and half-a-dozen steam gauges to monitor them - push button glass cockpits are alien environments to me. :lol:

That said, since the last AFS2 update improved the flight-planning and auto-pilot features, we should be able to get to KaiTak, and there are lots of NDBs and VORs in Colin's scenery to make radio nav work, but I don't think we will be able to autoland in the AFS2 planes which can do that - the IGS was very much a hand-flown approach.

ATB
Mike

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Fri Mar 12, 2021 6:46 pm
by Splitpin
"There is only one AFS2 guru around here, and I sit at his knee" as do I Charl.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Fri Mar 12, 2021 9:06 pm
by emfrat
Splitpin wrote:"There is only one AFS2 guru around here, and I sit at his knee" as do I Charl.

Thanks for those kind words...I did manage to get a haircut, but then it all went pear-shaped. You really don't want to know the details, but what should have been a simple 50min train ride and a 40min drive to get home was interrupted five times - and the trains run half-hourly - thanks to some sort of instant tummy bug. :(

Marty - what does your flying machine run, Win10 or Win7 ? Colin's instructions will work as is, but they can be improved on. That's what I want to provide for you and Charl.
Sorry for the delay
Mike

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 7:19 am
by Splitpin
Win 10 ...are feeling better now Mike (tummy)

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 8:23 am
by emfrat
Ta mate - all good so far. I'll make a start on the guide.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 9:08 am
by Splitpin
Thanks Mike, much appreciated ...I've just had another look, and I'm not sure ...so I won't touch it for now.
Get well fella.....thanks again.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 1:46 pm
by emfrat
Charl, Marty - please check your PMs
Mike

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 6:23 pm
by emfrat
emfrat wrote:Charl, Marty - please check your PMs


Bl**dy PMs ! :mad:
I tried to send one message to both Charl and Marty (i.e splitpin). It wasn't accepted - "You are trying to send to too many people"
So I send it only to Marty and it went. The link it contained worked just like a bought one.
Then I copied the contents of that PM into one for Charl and found that only half of the link text was active as a link (blue) and the rest was black.
So I had to go back into my Google Drive and copy the link again...that seems to be working now.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 7:27 pm
by Splitpin
Mike, I hope your feeling better and have been to the doc( bet you haven't)...don't mess around with that stuff mate.
I've got the HK thing going.... pretty good since it's only Beta....thanks for the guidance.
I've been trying to shoot that approach...but always too high...and bothered by annoying AI Concordes and DC-10's doing touch and go's.
Any way to get rid of them.?

I really wish AFS2 would allow,flap/gear movement in the pause, or a slew command. I fly the approach from way back... get configured .... arrive at the turn too high, and I have to do the whole thing again.... but lower, etc.
With slew (FSX/ P3D) I can save the config at the time, and re-start with changes in place.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 7:54 pm
by emfrat
Great we had a win! Try renaming airporttraf.tmb to airporttraf.tmb.off. That file is in scenery\places\hongkong\animation.
But why not have a nice beer instead - that's what I'm doing :D
Well done
Mike

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 8:20 pm
by Charl
Tsk Real World intruding again :)
Too many things going on here, including beer!
Thanks Mike I'll take a look when it's quiet.

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sat Mar 13, 2021 10:01 pm
by emfrat
Look what I found at flightsim.com - scroll down to the bottom of that page.
https://www.flightsim.com/vbfs/fslib.ph ... 958&page=2

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sun Mar 14, 2021 11:22 am
by Splitpin
emfrat wrote:Look what I found at flightsim.com - scroll down to the bottom of that page.
https://www.flightsim.com/vbfs/fslib.ph ... 958&page=2


:ph43r: AA Vehicle inspections ?

Re: Help with AFS2 scenery install ...Mike , Charl.

PostPosted: Sun Mar 14, 2021 12:02 pm
by emfrat
Splitpin wrote:
emfrat wrote:Look what I found at flightsim.com - scroll down to the bottom of that page.
https://www.flightsim.com/vbfs/fslib.ph ... 958&page=2


:ph43r: AA Vehicle inspections ?


Weird - that link went where it should have, yesty - but not today..

FS2004 (ACOF) - FS2004 Scenery
FS2004 Scenery--9Dragons - Kai Tak
[ Download | View ]

Name: 9dragon1.zip
Size: 22,206,000 Date: 01-02-2008 Downloads: 4,625

FS2004 Scenery--9Dragons - Kai Tak, part 1 of 5. Part 1 - 9 Dragons Pilots Guide. Come test your pilot skills to see if you can "Tame the Dragon" by mastering the infamous IGS 'checkerboard' approach! The pilots guide will help prepare you for taking that challenge as well as give insight into the airport, its history and Project 9Dragons. "Long Live the Tak". By Marcus Thompson, Frabrizio Pascucci, Eddie Chan, MileHigh Productions.