well I got it installed today and have had just a small look around just on default settings. I was most interested in the Auckland airport which was supposed to one of the "detailed" airports - well it looks like it is located near Auckland and there is a runway that runs 05/23 - apart from that I would have to say that whoever they sent down to look at Auckland (if they did) must have spent the time watching sky sport in the hotel bar and then done the software from out of focus brochures and scratchings on the back of a bar coaster!
where to start?...
incorrectly placed taxiways
missing taxiways
23R/05L is not painted up as a runway except for when it is in use while the main rwy is worked on - otherwise the paint markings are removed and all thelighting is returned to taxiway lighting.
***
(correction edit) the threshold markings are still there and the white side strips and distance markings
***
the parallel rwy does not have approach lighting on at the same time as 23L/05R
at night NZAA does NOT have blue edge lighting except for a small area around the aprons - the only lighting is the green taxiway centerline lighting (which appears to be missing)
apron areas wrongly shaped or missing especially down off C1 around the airfreight hangars
the control tower - wrong shape! yes the stem is nearly there and the balcony also - but the cab itself should be square not round
the gates at domestic bare very little relationship to what is there for real
the approach lighting pier for 05R is shown as a strip of land not a proper pier as it is
wiroa island on the south side appears to be covered in housing - instead of clear ground and mangroves, also the main primary radar head and the HF aerials are missing
even with all settings set on max (slideshow city) no sign of the VOR/DME on final 23L, rescue fire,the top story on the international building, the helipad over by the International terminal,most of the tank farm and lots of other places that have been around long enough to be included at max settings even allowing for the lead in time cutoff.
and when I first started up I was in the trike on 05R and the ATIS is going continuously FOR WHENPUAPAI and NO I have not misspelt it, microsoft has!
just looking around from ground level the horizon appeared to be a lot better for default but I see what everyone is talking about regarding the landclass - definitely not the green vista I am used to seeing out the tower windows.
well thats it for just the first look around - I will have to play a bit with settings as I couldn't get above 3-5 frames at night - looks like I will be sticking with FS9 for my flying and just playing with this one till I get it whipped into shape!
JonARNZ if you or Christian are going to do NZAA let me know as I have or can get quite a few maps charts and diagrams and also photos etc and would be happy to help as much as I can - Auckland International is New Zealands prime International gateway and its depiction in Flightsimulator has always left a lot to be desired - I know Dean and Shane have done versions and I had those and yes they were a vast improvement but I think the definitive NZAA is still to be done.
end of rant B)
*** edit correction above - but sitting here at work looking out the window as I'm typing this I can see even more inconsistancies
