NZFF

by **Menemeth** » Wed Sep 10, 2008 9:09 am

Here's a replacement Rotor texture ... Improves the overall look of the Tail Rotor blur, and Main Rotor overlay blur.

Installation:

Just replace the rotor.bmp file found in the FS9\Aircraft\ABSimulations NH-90 TTH RNZAF\texture folder with the one from this rar archive.

DOWNLOAD HERE

by **PiperDriver** » Wed Sep 10, 2008 9:16 am

I took the NH-90 for a run last night from Taku Lodge to Juneau in Alaska and it was an interesting experience.

I found the controls i bit heavy for my liking but other than that it performed very well.

by **Adrian Brausch** » Wed Sep 10, 2008 9:57 am

Menemeth wrote:
QUOTE (Menemeth @ Sep 14 2008, 10:09 PM) <{POST_SNAPBACK}>
Here's a replacement Rotor texture ... Improves the overall look of the Tail Rotor blur, and Main Rotor overlay blur.

Installation:

Just replace the rotor.bmp file found in the FS9\Aircraft\ABSimulations NH-90 TTH RNZAF\texture folder with the one from this rar archive.

DOWNLOAD HERE

To be honest there is nothing wrong with the rotor texture as it is,..but ill look at it,..how do you download it from fileshare <

PiperDriver wrote:
QUOTE (PiperDriver @ Sep 14 2008, 10:16 PM) <{POST_SNAPBACK}>
I took the NH-90 for a run last night from Taku Lodge to Juneau in Alaska and it was an interesting experience.

I found the controls i bit heavy for my liking but other than that it performed very well.

Do you have your realism settings on easy ?..

by **Menemeth** » Wed Sep 10, 2008 1:52 pm

brausch wrote:
QUOTE (brausch @ Sep 10 2008, 09:57 AM) <{POST_SNAPBACK}>
how do you download it from fileshare <

You're kidding!...Right?

by **Adrian Brausch** » Wed Sep 10, 2008 2:29 pm

Menemeth wrote:
QUOTE (Menemeth @ Sep 15 2008, 01:52 AM) <{POST_SNAPBACK}>
You're kidding!...Right?

clicked on the link you provided,..there is no download button,..nor did it start downloading automatically as the site suggested. send it to my email...

by **Menemeth** » Wed Sep 10, 2008 3:22 pm

dornier228 wrote:
QUOTE (dornier228 @ Sep 10 2008, 08:46 AM) <{POST_SNAPBACK}>
How can I change the landing light with 3D Shockwave ???

thanks

Joseph

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit ORDER IS : Z , X, Y ,
light.0 = 3, -5.118, -5.922, -3.045, fx_shockwave_navred , //fx_navred ,
light.1 = 3, -5.118 , 5.922, -3.045, fx_shockwave_navgre , //fx_navgre ,
light.2 = 3, -31.594, 0.827, 8.331, fx_shockwave_navwhi_l , //fx_navwhi ,
light.3 = 2, -31.594, 0.827, 8.331, fx_shockwave_strobe , //fx_strobe ,
light.4 = 1, -8.360, 0.00, -4.330, fx_beacon,
light.5 = 2, -8.360, 0.00, -4.330, fx_shockwave_strobe_lowl , //fx_strobeh ,
light.6 = 1, -31.594, 0.827, 8.331, fx_beacon,
light.7 = 5, 13.400, 1.90, -4.40, fx_shockwave_landing_light_narrow_down_22 ,

Place this gauge entry at the end of the gauge list uder the [Window00] section of the NH90 panel.cfg
gauge43=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light

NOTE: I'll post the Heat Haze info tomorrow.

brausch wrote:
QUOTE (brausch @ Sep 10 2008, 02:29 PM) <{POST_SNAPBACK}>
clicked on the link you provided,..there is no download button,..nor did it start downloading automatically as the site suggested. send it to my email...

You never downloaded from RapidShare before?...Just click the Free Download button, and you're good-to-go!

by **Adrian Brausch** » Wed Sep 10, 2008 4:42 pm

Thanks to Menemeth for a much improved alpha on the rotor.bmp ,..I have redone the transparent blades and disks to fix the problem of the blades sticking out like dogs balls,also renaming the rotor.bmp to "NH90_Texture_R.bmp" ,.. keep it in sync with the naming of the other textures. I will do a thourough re-check of the model and will send a new package to the airforce ,replacing the old one. I can do a zip file containing the new models and the new rotor texture for anyone who wants it. Menemeth,..can you possibly stick it up on the site where you have the rotor texture and then we could just create a new thread here on NZFF where people can download the new bits ?..

by **NZ255** » Wed Sep 10, 2008 5:29 pm

When I turn off the engines...I can't start them up again. Anyone know how?

by **Menemeth** » Thu Sep 11, 2008 12:31 am

NZ255 wrote:
QUOTE (NZ255 @ Sep 10 2008, 05:29 PM) <{POST_SNAPBACK}>
When I turn off the engines...I can't start them up again. Anyone know how?

Ctrl+Shift+F1= ShutDown
Ctrl+Shift+F4= StartUp

by **dornier228** » Thu Sep 11, 2008 8:30 am

Thanks Menemeth ....

Joseph

by **HueyTeam** » Thu Sep 11, 2008 9:06 am

brausch wrote:
QUOTE (brausch @ Sep 9 2008, 03:15 PM) <{POST_SNAPBACK}>
Dude,..cant believe that slipped through !. It was brought to attention shortly before release that the main blades were turning the wrong way,..so i fixed that ,..then altered the animation direction in the aircraft.cfg which because both main and tail rotors were affected then reversed the tail rotor animations as well,..which didnt occur to me at the time !. I have fixed that and will see about putting up a fix on the rnzaf site.

Cheers for bringing that to my attention mate

Sorry, that we donÂ´t found this while betatesting. Both rotors turning wrong, but Adrian will make many FS freaks happy with his release. Give him time for some fixes now.

by **Menemeth** » Thu Sep 11, 2008 10:51 am

Here's a Complete Enhancement Package Which Includes The Following:

1) Heat Haze effect (visible only when on the ground with engines running).

2) Turbine Smoke Effect (visible when Eng1 Torque is above 64%).

3) ShockWave Simulations (A2A Simulations) 3D Redux Lights v1.1 (you must have the 3D Redux lights v1.1 installed to see the light effects).

4) Rob Barendregt's VTOL v2.2 for helicopter (added in this packet).

NOTE: Read the README.txt for more info!

DOWNLOAD

by **Cobra** » Thu Sep 11, 2008 7:14 pm

Hello,
Is there a chance to be a beta tester for the FSX version ?

by **HueyTeam** » Thu Sep 11, 2008 11:21 pm

spanish livery on simviation

by **Adrian Brausch** » Thu Sep 11, 2008 11:46 pm

Cobra wrote:
QUOTE (Cobra @ Sep 16 2008, 08:14 AM) <{POST_SNAPBACK}>
Hello,
Is there a chance to be a beta tester for the FSX version ?

Sorry not at this stage mate,..I have enough people on the project at the moment,..

by **HueyTeam** » Fri Sep 12, 2008 4:15 am

brausch wrote:
QUOTE (brausch @ Sep 11 2008, 11:46 PM) <{POST_SNAPBACK}>
Sorry not at this stage mate,..I have enough people on the project at the moment,..

and a lot of work too

by **Cobra** » Fri Sep 12, 2008 6:14 am

brausch wrote:
QUOTE (brausch @ Sep 11 2008, 01:46 PM) <{POST_SNAPBACK}>
Sorry not at this stage mate,..I have enough people on the project at the moment,..

No problem. I work on the NH90 so if you need help post it and then I look what I can do for you.

by **Adrian Brausch** » Fri Sep 12, 2008 10:45 am

Cobra wrote:
QUOTE (Cobra @ Sep 16 2008, 07:14 PM) <{POST_SNAPBACK}>
No problem. I work on the NH90 so if you need help post it and then I look what I can do for you.

Yep will do mate,..if we need more help you'll be first one ill message ..

NZFF

NH-90 TTH RNZAF

Who is online